fbpx

Full Changelog


Electrical Calculations

(Android)

v7.2.4
11/02/2019
* New: Settings backup
* Add: “DOD” in Ah/kWh Conversion
* Add: kg/cm² in Pressure Conversion
* Add: Button to search the standard resistance in some calculations
* Add: Selectable result
* Mod: Improved landscape layouts
* Add: <a href=”https://www.pinterest.com/egalnet/”>Pinterest Profile</a>
* Upd: Portuguese [PT] language (by Leandro Sousa)
* Upd: Indonesian language (by Andarinyo)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Persian language (by Danesh)
* Upd: Bosnian language (by Ferid)
* Upd: Russian language (by Murtozakul)
* Upd: Bulgarian language (by Ivan Radev)
* Fix: Topic subscription Exception
* Mod: Removed Firebase Invites

 

v7.2.3
07/12/2018
* Add: “in lbf” in Torque conversion
* Add: MVA in “Calculation of current”
* Upd: German language (by Andreas)
* Upd: Ukrainian language (by Igor)
* Upd: Czech language (by Skipy)
* Upd: Bosnian language (by Ferid)

 

v7.2.2
09/11/2018
* Fix: Translator Tool with Android 4
* Fix: Changelog dialog
* Upd: Bolivian voltage
* Upd: Russian language (by Murtozakul)
* Upd: Portuguese [BR] language (by Leonardo Knuppe)
* Upd: Romanian language (by Pătrașcu Laurențiu)

 

v7.2.1
07/11/2018
* Add: Support for 20, 22, 24, 26, 28 awg
* Add: Operating temperature to “Maximum wire length”
* Fix: Calculation of the neutral size
* Fix: Print function
* Upd: Arabic language (by Abdusalam Qaissia)
* Upd: Czech language (by Shadel Fox)
* Upd: Persian language (by Abbas Babaei and Maghsood)
* Upd: Romanian language (by Patrascul25)
* Upd: Spanish language (by Fernando)
* Upd: Vietnamese language (by Phạm Thiên Thanh)
* Add: Bosnian language [partial] (by Linimd)

 

v7.2.0
02/09/2018
* Add: Support for 16 and 18 awg
* Fix: Nec Calculations and Thermocouples not PRO
* Upd: Czech language (by Skipy)
* Upd: Simplified Chinese language (by Tian Hongpeng)
* Upd: Spanish language (by Lautaro Dalibon)
* Upd: Arabic language (by Akram gashan)

 

v7.1.1
21/08/2018
* New: Print support
* Fix: Crash at startup
* Fix: Calculation of resistance and Calculation of voltage with three-phase current
* Fix: Japan three-phase voltage
* Upd: Hungarian language (by Latcyba)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Ukrainian language (by Andrey Kosenko)
* Mod: Removed support for serial number
v7.0.3
10/07/2018
* Fix: Crash in “Fuse” section
* Upd: Russian language (by Murtozakul)
* Upd: Slovienian language (by Davorin Caf)

 

v7.0.2
19/06/2018
* Mod: Improved “Conduit fill” IEC
* Fix: Crash “Retma Spinner” with RTL languages
* Fix: Some layouts RTL
* Fix: ViewPager
* Upd: Simplified Chinese language (by Tian Hongpeng)
* Upd: Ukrainian language (by Andrey Kosenko)
* Upd: Danish language (by Esben Dahl)
* Upd: German language (by Alex)

 

v7.0.1
08/06/2018
* Imp: Added kW to “Motor full-load current”
* Fix: Crash wire size with installation type D2
* Fix: Ads runnable bug
* Fix: Minor bugfix
* Upd: Persian language (by Hadi Lael Bahador)
* Upd: Vietnamese language (by Nguyễn Duy Trung)
* Upd: Russian language (by Murtozakul)
* Upd: Simplified Chinese language (by Tian Hongpeng)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Bulgarian language (by Ivan Radev)
* Upd: German language (by Andreas)
* Fix: Removed wrong Tamil language

 

v7.0.0
24/05/2018
* New: General reorganization of the calculations
* New: Motor slip
* New: Motor full-load current
* Imp: Improved calculations with resistor color code
* Mod: “Pipes dimensions” is available in the Resources tab
* Mod: cm-inch conversion is included in the Length conversion
* Mod: kW-HP conversion and kW-BTU/h conversion were merged into Power conversion
* Imp: Improved table of resistivity and conductivity
* Add: Ampacity of cables smaller than 25mm² for the installation method G
* Add: mmH2O to pressure conversion
* Upd: Ukrainian language (by Vyacheslav)
* Upd: German language (by Andreas)
* Upd: Vietnamese language (by Nguyễn Duy Trung and ManhLD)
* Upd: Czech language (by Skipy)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Turkish language (by Bekir Aydogdu)
* Upd: Portuguese [PT] language (by Leandro Sousa)
* Upd: Portuguese [BR] language (by Antonio Fraga)
* Upd: Polish language (by Kacper Szuba)
* Upd: Romanian language (by Laurentiu Petre)
* Upd: Traditional Chinese language (by EricLee)
* Fix: Large wire size calculation
* Fix: Rounding of the reactance value
* Fix: Indonesian language bug
* Fix: Minor bugfix

 

v6.4.0
05/04/2018
* New: ANSI standard device numbers
* New: Analog signal values
* Imp: Voltage drop calculation
* Add: Settings: max wire size
* Imp: Impedance calculation
* Mod: Primary/Secondary winding of transformer is available in the free version
* Upd: Vietnamese language (by Trung Lê)
* Upd: Arabic language (by Ous Yasen)
* Upd: German language (by Andreas)
* Upd: Macedonian language (by Dragančo Velkov)
* Fix: Bug operating current
* Fix: Check update
* Fix: Country identification

 

v6.3.6
24/01/2018
* Upd: Resolutions
* Fix: Ads bug with Android Oreo
* Fix: Calculation of NTC temperature
* Fix: Image of the motor terminal board
* Upd: Polish language (by Marcin Antas)

 

v6.3.5
12/01/2018
* Fix: Crash “Sizing the circuit breaker NEC” in landscape mode
* Fix: Crash “Translator Tool” with portuguese language
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Czech language (by Skipy)
* Upd: Bulgarian language (by Ivan Radev)
* Upd: Ukrainian language (by Andrey Kosenko)
* Upd: German language (by Andreas)

 

v6.3.4
03/01/2018
* New: Current carrying capacity of bare conductors
* Add: Noncontinuous loads in “Sizing the circuit breaker NEC”
* Upd: Portuguese [BR] language (by Junior Messias)
* Mod: Macedonian (Cyrillic) language (by Dragančo Velkov)
* Fix: Voltage in Brazil
* Fix: Appirater

 

v6.3.3
19/11/2017
* Add: Macedonian language (by Dragančo Velkov)
* Upd: Czech language (by Skipy)
* Upd: Vietnamese language (by TuanNguyen, Tuấn Phùng and Nguyễn Duy Trung)
* Upd: Persian language (by Jamal Moghadami)
* Fix: Code capacitor chart
* Fix: Section conversion in the free version
* Fix: Translator Tool bug with persian language
* Fix: Notifications with Android Oreo

 

v6.3.2
14/09/2017
* Fix: Bug in search mode
* Fix: Open/share files
* Upd: Slovenian language (by Davorin Caf)
* Upd: French language (by Yves Tschantz)
* Upd: Polish language (by Yasioo)
* Upd: Russian language (by Murtozakul)
* Upd: Spanish language (by Ángel Tepetla and GavilanZ)
* Upd: Bulgarian language (by Ivan Radev)
* Upd: Persian language (by Amin Norozi)

 

v6.3.1
27/08/2017
* New: Translator Tool
* New: Splash screen
* Add: LinkedIn profile
* Upd: Russian language (by Leonid Tsvetinovich)
* Upd: Czech language (by Skipy)

 

v6.3.0
06/07/2017
* New: Temperature sensors (PT/NI/CU, NTC, Thermocouples…)
* Mod: Thermocouple colour codes and data
* Mod: Some calculations are also available in the FREE version
* Upd: Portuguese language (by Leandro Sousa)
* Upd: German language (by Andreas)
* Upd: Padding of icon
* Fix: Temperature now accepts negative values
* Fix: Philippines three-phase voltage
* Fix: Static AsyncTask

 

v6.2.1
04/05/2017
* Add: Installation type D2
* Add: Wire size with sizing neutral and PE (IEC)
* Add: Choosing sizing method for neutral and PE in settings
* Upd: German language (by Andreas)
* Upd: Ukrainian language (by Roman Korzh)
* Upd: Czech language (by Skipy)
* Upd: Portuguese language (by Leandro Sousa)
* Upd: Nepali language (by Sagar Acharya)
* Fix: Current carrying capacity for B1 method
* Fix: Bug last stripe (PPM)
* Fix: Workaround for bug 19917
* Fix: Bug “IllegalArgumentException” in the request state of ProKey
* Fix: Amazon App Store (uk.amazon.mShop.android) not recognized

 

v6.2.0.1
28/03/2017
* Add: Ambient temperature to “Wire size” calculation
* Add: NEC installation type “Supported on a messenger”
* Add: Three-phase voltage in the “Electricity around the world”
* Add: Other formulas
* New: Renewed settings
* Add: Added settings “Default direct current voltage”, “Power factor default” and “Max voltage drop”
* Upd: German language (by Andreas)
* Upd: Ukrainian language (by Roman Korzh)
* Upd: Czech language (by Skipy)
* Upd: Persian language (by Sina Kheymedoozi)
* Fix: Retma code
* Fix: Bug “modified voltage” after the choice of installation type
* Fix: Bug “Unable to start activity ComponentInfo” in the request state of ProKey
* Fix: Bug “extras == null” in ActivityWidgetConfig
* Fix: Bug “Close Action Mode”
* Fix: Layouts RTL
* Fix: Amazon App Store not recognized on Android 7
* Fix: Minor bugfix

 

v6.1.0
22/02/2017
* New: Conduit fill
* New: Tripping curves
* New: Torque conversion
* New: Angle conversion
* New: kW – BTU/h conversion
* Mod: Renewed translation page
* Mod: Renewed some icons
* Mod: New style for AlertDialog and Toast
* Mod: “Fuses” available in the free version
* Add: Firebase with Invites
* Fix: Improved “Short circuit current with transformer substation”
* Fix: Cursor at the end of EditText
* Fix: Widget config bug
* Fix: Bug “Dialog in OnPostExecute”
* Upd: Polish language (by Kacper Szuba)
* Upd: Slovenian language (by Sašo Veternik)
* Upd: Portuguese [PT] language (by Leandro Sousa)
* Upd: Russian language (by Leonid Tsvetinovich)
* Upd: Magyar language (by Sándor Marosi)
* Upd: Simplified chinese language (by Tian Hongpeng)
* Upd: Traditional chinese language (by Eric Lee)
* Upd: Czech language (by Skipy)
* Upd: Turkish language (by Bekir Aydogdu)
* Upd: Croatian language (by Pero Razović)
* Upd: Vietnamese language (by Nguyễn Duy Trung)
* Add: Nepali language [partial] (by Sagar Acharya)

 

v6.0.0
28/11/2016
* New: Capacitor code
* New: Fuses application categories
* New: Thermocouples
* New: Earthing system
* New: CCTV resolutions
* New: CCTV Harddrive/Bandwidth calculator
* New: Current divider
* New: Conversion byte
* New: NEMA Electrical symbols
* New: UL/CSA fuse class
* New: Capacitor power at different voltage
* New: Short-circuit current min (approximate method)
* New: Pinout MIDI
* New: Pinout Thunderbolt
* New: Pinout SD Card
* New: Pinout Sim Card
* Add: Preliminary compatibility with Android 7.1
* Add: Animation for the results
* Upd: Vietnamese language (by Nguyễn Duy Trung)
* Upd: Croatian language (by Pero Razović)
* Upd: Arabic language (by Abdusalam Qaissia)
* Upd: Portuguese [PT] language (by Leandro Sousa)
* Upd: Portuguese [BR] language (by Moacir Carvalho)
* Upd: Simplified chinese language (by Tian Hongpeng)
* Upd: Czech language (by Skipy)
* Upd: Persian language (by Sajjad Asadbeygi)
* Upd: Polish language (by Kacper Szuba)
* Upd: Turkish language (by Bekir Aydogdu)
* Upd: Romanian language (by Silvian Ionescu)
* Upd: Magyar language (by Sándor Marosi)
* Upd: Slovenian language (by Sašo Veternik)
* Upd: German language (by Claudio Ruffino)
* Upd: Russian language (by Leonid Tsvetinovich)
* Upd: Swedish language (by Jimmy Olandersson)

 

v5.2.0
06/10/2016
* Imp: Short circuit current with transformer substation
* Imp: Power factor correction
* Mod: Calculations “Power factor correction” and “Power factor correction small loads” have been merged
* Add: Number of neutral conductors in parallel in the short-circuit current calculation
* Add: Choice φ in radians or degrees in “Calculation of reactive power”
* Add: kVA and kVAr to “Calculation of power factor”
* Upd: Dutch language (by Felipe Espitia)
* Upd: Vietnamese language (by Nguyễn Duy Trung)
* Fix: Minor bugfix

 

v5.1.6
13/09/2016
* Add: Preliminary compatibility with Chromebook
* Add: Notification of updates
* Upd: Simplified chinese language (by Tian Hongpeng)
* Upd: Magyar language (by Sándor Marosi)
* Fix: Sizing the circuit breaker
* Add: FAQ for invalid ProKey
* Add: Privacy policy

 

v5.1.5
03/08/2016
* Add: Preliminary compatibility with Android N
* Upd: Arabic language (by Ilyahoo Proshel)
* Upd: Vietnamese language (by Nguyễn Duy Trung)
* Upd: Portuguese [PT] language (by Leandro Sousa)
* Upd: Persian language (by Sajjad Asadbeygi)
* Fix: String 150 mm² into the “Table of unitary voltage drop”
* Fix: Unit of measurement of the resistivity Ω*m/mm²
* Fix: Entering the maximum drop after the choice of installation type
* Fix: Alignment of spinner dropdown into the RTL languages
* Mod: Load current must be less than 7% of the maximum cable capacity

 

v5.1.4
23/05/2016
* Add: Choice unipolar/multipolar cable into the “Conductor resistance”
* Add: Choice operating temperature into the “Calculation of voltage drop”
* Mod: Choice up to 8 phase conductors in parallel
* Imp: Improved some layouts landscape
* Imp: Edited some pictures of the sockets
* Upd: Portuguese [PT] language (by Leandro Sousa)
* Upd: Turkish language (by Bekir Aydogdu)
* Fix: Crash of “Conversion awg/mm²”

 

v5.1.3
17/05/2016
* Add: Choice unipolar/multipolar cable into the “Calculation of voltage drop”, “Max wire length” and “Short-circuit current”
* Add: Number of phase conductors in parellel into the “Calculation of voltage drop” and “Short-circuit current”
* Add: Formula for choice wire size
* New: Layout for tables of results
* Fix: Visualization of the formula into “Sizing the circuit breaker” NEC
* Fix: Bug 8bit request code
* Imp: Improved notification for the insertion of incorrect values
* Add: Danish language (by Esben Dahl)
* Upd: Portuguese [PT] language (by Leandro Sousa)
* Upd: Romanian language (by Silvian Ionescu)
* Upd: Traditional Chinese language (by Siu Wing Chung)
* Upd: Greek language (by Andrea Agates)

 

v5.1.2.1
14/04/2016
* Fix: Sum resistors/capacitors now accept decimal numbers
* Fix: MultiprocessPreferences bug
* Fix: Removed old calculation did not consider the ICC at beginning of line
* Fix: Added Zcc into the formula of short-circuit current

 

v5.1.2
13/04/2016
* Imp: Improved calculation of short-circuit current
* Fix: NullPointerException into “Wire size” and “Sizing the circuit breaker”
* Fix: Bug support.v7.view.menu.MenuBuilder
v5.1.1
06/04/2016
* New: Material design also for older devices
* Add: Search bar
* Add: Improved “Sum resistors” with Ω, kΩ, MΩ
* Add: Improved “Sum capacitors” with pF, nF, µF
* Add: Socket type F to Guinea Bissau
* Add: Socket type C and F to Western Sahara
* Fix: Formula tanφ = Q/P
* Upd: Russian language (by GudWin)
* Upd: Persian language (by Zahed Masoudi Chianeh)
* Upd: Catalan language (by Yassine)
* Upd: Bulgarian language (by Tarik Azzehni)
* Upd: German language (by Claudio Ruffino)
* Upd: Portuguese [PT] language (by Leandro Sousa)
* Upd: Norwegian language (by Matheusiin Villela)

 

v5.1.0
25/02/2016
* New: Sizing the circuit breaker
* New: Calculation of power factor
* New: Max wire length
* New: Appliance classes
* New: Plug & socket types
* New: IEC 60320 connectors
* New: Buttons layout
* Add: Formulary icon into action bar
* Upd: Czech language (by Skipy)
* Upd: Polish language (by Kacper Szuba)
* Upd: Croatian language (by Pero Razović)
* Upd: Portuguese [PT] language (by Leandro Sousa)
* Upd: Portuguese [BR] language (by Moacir Carvalho)
* Upd: Serbian language (by Miloš Stevanović)
* Upd: Turkish language (by Bekir Aydogdu)
* Fix: Conversion from MegaGauss or KiloGaus
* Fix: Improved rounding of “Conversion pressure”
* Fix: Bug screenshot capture on some devices
* Fix: Bug max voltage drop 0%
* Add: Debug command line

 

v5.0.3.1
02/02/2016
* Fix: Compatibility with Android 6.0

 

v5.0.3
01/02/2016
* Add: Pinout PCI Express power cable (into Molex section)
* Add: Formula voltage drop DC
* Upd: Serbian language (by Miloš Stevanović)
* Upd: Slovenian language (by Tomaž Dobrila)
* Upd: Romanian language (by Cristi Duta)
* Upd: Portuguese-BR language (by Julio Cesar Stempkowski)
* Upd: New table layouts
* Fix: Calculation of voltage drop DC
* Fix: Compatibility with Android 6.0
* Fix: Improved some layouts

 

v5.0.2
17/11/2015
* Upd: Malay language (by Nazrul Afdhal)
* Fix: Rewrited changelog class
* Fix: Minor bugfix
* Add: Adv

 

v5.0.1
16/11/2015
* Upd: Dutch language (by Robert Wintersteijn)
* Fix: Bug exit application in Android 4
* Fix: Crush table of cables reactance NEC
* Fix: Issue on Blackberry

 

v5.0.0
09/11/2015
* New: Formulary
* New: Capacitor start motor single-phase
* New: Table of cables reactance
* New: Calculation “Impedance”
* New: Pinout Ethernet with PoE
* New: Pinout FireWire (IEEE1394)
* New: Pinout Apple Lightning
* New: Pinout Apple Dock Connector
* New: Pinout PS/2
* New: Color code fiber optic
* Mod: Old calculation “Capacitor for single-phase motor” has been renamed to “From three-phase to single-phase”
* Imp: Improved calculation of fault current
* Imp: Improved calculation “Antenna length”
* Imp: Improved readability of the symbols
* Imp: Electricity around the world with new images
* Add: Reactance and impedance into calculation “Conductor resistance”
* Add: Letters to the IP Protection Classes
* Add: Allow sections < 1.5 mm² into “Wire size IEC”
* Add: Result in mm² also into “Wire size NEC”
* Add: Setting for default method IEC/NEC
* Add: Unit of measurement pF, nF e µH into some calculations
* Add: Hebrew language (by Rafael keller)
* Upd: Persian language (by Reza Taherizadeh)
* Upd: Czech language (by Skipy)
* Upd: Deutsch language (by JoHa)
* Upd: Polish language (by Kacper Szuba)
* Upd: Portuguese [PT] language (by Leandro Sousa)
* Upd: Turkish language (by Bekir Aydogdu)
* Upd: Arabic language (by Abdusalam Qaissia)
* Upd: Vietnamese language (by Nguyễn Duy Trung)
* Upd: New license check of the Pro Key
* Add: Splash screen
* Fix: Accepted resistance < 1 ohm
* Fix: Improved some layouts

 

v4.2.1
14/08/2015
* Fix: Correction max voltage drop expressed in Volt

 

v4.2.0
12/08/2015
* Add: “Installation type” and “Insulation” to the calculation of wire size
* Add: “Installation type” to the calculation of current carrying capacity
* Add: Pinout USB 3.1 C
* Imp: Improved rounding “Calculation of voltage drop”
* Imp: Improved calculation “Colors resistor from value”
* Add: “Right To Left locales” for arabic language
* Upd: Updated Deutsch language (by na2xs2y)
* Upd: Updated Portuguese [PT] language (by Leandro Sousa)
* Upd: Updated Polish language (by Kacper Szuba)
* Upd: Updated Vietnamese language (by Nguyễn Duy Trung)
* Upd: Updated Czech language (by Skipy)
* Upd: Updated Turkish language (by Bekir Aydogdu)
* Fix: Calculation resistance for led in parallel
* Fix: Update voltage changing device orientation
* Fix: Improved some layout-large
* Fix: Hong Kong sockets

 

v4.1.0
01/06/2015
* New: Short circuit current with transformer substation
* New: IK/NEMA Code
* New: Renewed graphics of “Wiring color codes”
* New: “Electrical symbols” & “Diagram three-phase motor” now are libre.
* Add: Added Ukrainian language (by Roman Korzh)
* Upd: Updated Slovenian language (by Sašo Veternik)
* Upd: Updated Turkish language (by Bekir Aydogdu)
* Upd: Updated Portuguese [PT] language (by Leandro Sousa)
* Upd: Updated Russian language (by Djek.Energetik)
* Upd: Updated Arabic language (by Abdusalam Qaissia)
* Upd: Updated Croatian language (by Pero Razović)
* Fix: Fixed bug “Colors resistor from value” with resistors <= 10 Ohm
* Fix: Montserrat socket type G
* Fix: Improved some layout
* Fix: Minor bugfix

 

v4.0.2
26/04/2015
* New: Pinout led
* Add: Added IP69K
* Add: Added Slovenian language (by Sašo Veternik)
* Upd: Updated German language (by Claudio Ruffino)
* Upd: Updated Romanian language (by Laurentiu Petre)
* Upd: Updated Traditional Chinese language (by Jose Enrique Gutierrez)
* Upd: Updated Catalan language (by antoine.nom36)
* Upd: Updated Serbian language (by Vladimir Cvijović, Velimir Lazarević)
* Upd: Updated Arabic language (by Abdusalam Qaissia)
* Upd: Updated Czech language (by Skipy)
* Fix: Negative resistance for leds
* Fix: Minor bugfix

 

v4.0.1
29/01/2015
* Add: Ability to sort calculations
* New: Material Design Theme for Android 5.0
* Add: Added Swedish language (by Jimmy Olandersson)
* Add: Added Traditional Chinese language (by EricLee)
* Imp: Improved calculation of capacitor for single-phase motor
* Add: Wiring diagram in “Battery life” calculation
* Imp: Calculation of active power also accepts current expressed in kVA
* Imp: Short circuit current decimal
* Fix: NumberFormatException in SMD resistor code
* Fix: Minor bugfix
* Upd: Updated Greek language (by Tasos Pergantis)
* Upd: Updated Persian language (by Behnam Lashgari TJ.)
* Upd: Updated Russian language (by Djek.Energetik)
* Upd: Updated Croatian language (by Pero Razović)
* Upd: Updated Portuguese [PT] language (by Leandro Sousa)
* Upd: Updated Portuguese [BR] language (by Paulo Pepeleascov)
* Upd: Updated Vietnamese language (by Nguyễn Duy Trung)
* Upd: Updated Polish language (by Kacper Szuba)

 

v4.0.0
02/12/2014
* New: Zener diode as voltage stabiliser
* New: Reactance
* New: Resonant frequency
* New: Primary/Secondary winding of transformer
* New: SMD resistor code
* New: Motor section (“Capacitor for single-phase motor” e “Calculation rpm motor” have moved here)
* New: Motor efficiency
* New: Maximum torque
* New: Diagram three-phase motor
* New: Conversion φ/senφ/cosφ/tgφ
* New: Conversion of section
* New: Conversion RPM – rad/s – m/s
* New: Conversion Ah / kWh
* New: Conversion gauss / tesla
* New: Power factor correction of transformer MV/LV
* New: Unit of measurement
* Add: DC wiring color codes
* Add: Faq
* Imp: Improved Battery Life calculator
* Add: Support to Android 5.0
* Fix: Restored compatibility with Android < 2.2
* Fix: Rounding Joule effect
* Add: Added Norwegian language (by drzordz)
* Add: Added Bulgarian language (by Ivaylo Malinov)
* Upd: Updated Russian language (by Djek.Energetik)
* Upd: Updated Czech language (by Skipy)
* Upd: Updated Vietnamese language (by Nguyễn Duy Trung)
* Upd: Updated Serbian language (by Saša Fišić)
* Upd: Updated Polish language (by Kacper Szuba)
* Upd: Updated Portuguese [BR] language (by Antonio Fraga & Paulo Pepeleascov)
* Upd: Updated Portuguese [PT] language (by Leandro Sousa)
* Upd: Updated Turkish language (by Emrah HARMANBAŞI)
* Upd: Updated Croatian language (by Pero Razović)
* Upd: Updated Simplified Chinese language (by Xingwang Cao)
* Upd: Updated Lithuanian language (by Arturas Kalasunas)
* Upd: Updated Magyar language (by Oláh-Szőnyi Csaba)

 

v3.3.1
07/11/2014
* Upd: Updated Russian language (by Djek.Energetik)
* Upd: Updated Czech language (by Skipy)
* Upd: Updated Vietnamese language (by Nguyễn Duy Trung)
* Add: Wiring color codes for DC power
* Add: Faq
* Imp: Improved Battery Life calculator
* Fix: Restored compatibility with Android < 2.2

 

v3.3.0
06/10/2014
* Add: Added Vietnamese language (by Nguyễn Duy Trung)
* Add: Added Catalan language (by Rafael Vila)
* Upd: Updated Dutch language (by Robert Wintersteijn)
* New: Conductor resistance
* New: SI Prefix
* New: New section “Conversion” (mm²/awg, HP/kW, cm/inch, Y/Δ have moved here)
* New: Conversion length
* New: Conversion voltage (Amplitude)
* New: Conversion energy
* New: Conversion temperature
* New: Conversion pressure
* Add: Default voltage (Setting Menu)
* Imp: Improved choice mm²/awg
* Imp: The temperature is displayed in °Celsius and °Fahrenheit
* Fix: Correcting color encoding of resistance MΩ
* Upd: Updated Portuguese [BR] language (by Paulo Pepeleascov)
* Upd: Updated Portuguese [PT] language (by Leandro Sousa)
* Upd: Updated French language (by Yves Tschantz)
* Upd: Updated Croatian language (by Pero Razović)
* Upd: Updated Polish language (by kac222)

 

v3.2.5
31/08/2014
* New: Added Portuguese language [PT] (by Leandro Sousa)
* New: Added Czech language (by Skipy)
* Add: Added information to the calculation of the section
* Add: Added ability to zoom in images pinouts
* Add: Pinout Raspberry PI model B+
* Add: Calculation of section, voltage drop and current now accept also the load in HP
* Add: Improved “Resistance for led” with the addition of table LED tensions

 

v3.2.4
20/08/2014
* New: Wiring color codes
* Add: Added Serbian language (by Saša Fišić)
* Imp: Improved some layout
* Imp: Improved pinout XLR (Audio/DMX)
* Fix: Correction of check capacity in calculation of section

 

v3.2.3
30/07/2014
* New: Pinout XLR (Audio/DMX)
* Fix: Minor bugfix

 

v3.2.2.1
25/07/2014
* Available the new app “Electrical Cost
* Upd: Updated Romanian language (by Cristi Duta)
* Add: Support serial number

 

v3.2.1
20/07/2014
* Upd: Updated Turkish language (by Emrah HARMANBAŞI)
* Upd: Updated Dutch language (by Ilyahoo Proshel)
* Upd: Updated Portuguese language (by Paulo Pepeleascov)
* Fix: Correct check with sections over 300 mmq

 

v3.2.0
10/07/2014
* New: Current carrying capacity of cables (NEC)
* New: Power factor correction of small loads
* New: Possibility to preview the PRO calculations
* Add: Breaking capacity of fuses
* New: Added Lithuanian language (by Arturas Kalasunas)
* New: Added Simplified Chinese (by Xingwang Cao)
* Upd: Updated Persian language (by Behnam Eskandariun)
* Upd: Updated Croatian language (by by Pero Razović)
* Upd: Updated Greek language (by Tasos Pergantis)
* Upd: Updated Magyar language (by Oláh-Szőnyi Csaba)
* Upd: Updated Polish language (by kac222)
* Mod: If the app “Lighting calculations” is installed, you can launch it directly from the menu

 

v3.1.2
23/05/2014
* Available the new app “Lighting Calculations
* Upd: Updated Russian language (by Vasiliy Bolshakov)
* Upd: Updated Croatian language (by by Pero Razović)
* Upd: Updated Persian language (by Ahmad Tahmasebi)
* New: Pinout Sata
* Add: Possibility to hide or show the ProKey icon
* Mod: Edited “Settings” interface
* Fix: Pinout VGA
* Fix: Minor bugfix
v3.1.1
16/04/2014
* New: Added Persian language (by Behnam Eskandariun)
* Upd: Updated Croatian language (by by Pero Razović)
* New: Pinout Iso 10487 (Car Audio)
* Fix: Fixed crush “Calculation of voltage drop”
* Fix: Fixed bug Icc min with sections above 120 mmq
* Imp: Sum resistors accept also the value 0 (short circuit)
* Imp: RPM motor with frequency choice from 0 to 400 Hz
* Imp: Various improvements at pinout section
* Imp: “Resistance for led” also calculates the value of the resistor in watts

 

v3.1.0
17/03/2014
* New: Fuses
* New: Electricity around the World
* New: Conversion cm/inch with pipes diameter
* Add: Current carrying capacity of unipolar and multipolar cables
* Add: Current carrying capacity with variation of ambient temperature
* Imp: Updated calculations with section up to 1000 kcmil
* Fix: Error calculation of section three-phase

 

v3.0.3
24/02/2014
* New: Added Malay language (by Nazrul Afdhal)
* Upd: Updated Greek language (by Tasos Pergantis)
* Upd: Updated French language (by Yves Tschantz)
* Imp: Calculation of section with checking of capacity
* Imp: Calculation of intensity accept now also the resistance
* Imp: Calculation of power accept now also the resistance
* Add: Added velocity factor to calculation “Antenna length”

 

v3.0.2
09/01/2014
* New: Added Dutch language (by Ilyahoo Proshel)
* New: Added Magyar language (by Oláh-Szőnyi Csaba)
* New: Added Croatian language (by Pero Razović)
* Upd: Updated Portuguese language (by Moacir Carvalho)
* Fix: Power factor
* Fix: Image pinout RJ-45

 

v3.0.1
16/12/2013
* New: Added Russian language (by Leonid Tsvetinovich)
* Upd: Updated German language (by Claudio Ruffino)
* New: Table of resistivity
* New: Added “Share screenshot” button to menu
* Imp: Correction Turkish language
* Fix: Title Pinout

 

v3.0.0
25/11/2013
* New: Support Android 4.4 KitKat
* New: Added Romanian language (by Lucian Voica)
* New: Added Turkish language (by Emrah HARMANBAŞI)
* New: Conversion Δ-Y
* New: Antenna length
* New: Conversion cm/inch
* New: Pinout DVI
* New: Pinout RS-232
* New: Pinout RJ-11,14,25,48
* New: Pinout Molex
* New: Expanded symbology
* Imp: Improved layout “IP Protection Classes”
* Imp: Improved calculation “Colors resistor from value”
* Imp: Extended conversion table awg/mmq
* Fix: Corrected conversion feet and yards
* Fix: “Current carrying capacity of cables” now accept also the section in awg
* Fix: Removed limit maximum voltage 10000V

 

v2.7.0
29/10/2013
* New: Added Latvian language (by Witold Džeriņš)
* New: Calculation of reactive power
* New: Pinout HDMI
* New: Pinout VGA
* New: Improved “Current carrying capacity of cables” with choice type of installation and sections up to 300mmq
* Fix: Correction Greek language
* Fix: Bug fix radio button

 

v2.6.0
16/10/2013
* New: Added Greek language (by Tasos Pergantis)
* New: IP Protection Classes
* New: Show colors resistor from its value
* New: Pinout GPIO Raspberry
* Fix: Corrected color of spinner in old devices
* Fix: Corrected compatibility with Android 3.0 Api Level 11
* Fix: Corrected rounding “Resistance to reduce voltage”
* Fix: Corrected the minimum load to 0.001A in “Battery life”

 

v2.5.1
04/10/2013
* New: Added german language (by Diego Maggi)
* Fix: Corrected the error of voltage drop using very low voltages

 

v2.5.0
27/09/2013
* New: Section “Pinout”
* New: Pinout Scart
* New: Pinout USB
* Mod: Moved “Ethernet wiring” inside the section Pinout
* New: Calculation of voltage
* New: “Resistance to reduce voltage” now accept also the load expressed in mA, return the value of resistance also in Watt
* Fix: Corrected the utilization “Only available sections” for sections above 50mmq
* Fix: Corrected the utilization of multiples widgets in some devices

 

v2.4.3
06/09/2013
* New: Improved the calculation “Battery life” with insertion Peukert’s coefficient
* Fix: Corrected the calculation of three-phase apparent power

 

v2.4.2
02/09/2013
* New: Current carrying capacity of cables
* New: Calculation of section, calculation of voltage drop, calculation of VA and calculation of resistance now accept also the power expressed in Kw
* New: Improved calculation of resistance for led

 

v2.4.1
13/08/2013
* New: The new strings are translated in Arabic language (by Ghassan Al_dahab)
* New: Added Polish language (by RaV)

 

v2.4.0
05/08/2013
* New: Calculation of fault current of strings
* New: “Calculation of intensity” now accepts also the power expressed in Kw
* Fix: Application crash landscape in “Calculation of intensity”
* Fix: Check update work with the new Play Store

 

v2.3.1
26/07/2013
* Fix: Corrected tolerance of the resistors

 

v2.3.0
24/07/2013
* New: Calculation of VA
* New: Arabic language (by Ghassan Al_dahab)
* Fix: Corrected others roundings

 

v2.2.0
06/07/2013
* New: Calculation of short circuit current
* New: Improved calculation of capacitor for single-phase motor with sense of rotation
* New: “Calculation of section” accepts voltage drop also in percentage
* New: You can choose the default measurement unit of length on the menù “Setting”
* Fix: Corrected sum of resistors in parallel and sum of capacitors in series

 

v2.1.2
26/06/2013
* Fix: Error calculation rpm motor
* Fix: Displaying results on some devices

 

v2.1.1
25/06/2013
* New: Added portuguese language [PRO] by José Machacaz
* New: Calculation rpm motor [PRO]
* Fix: Hiding soft keyboard

 

v2.1.0
17/06/2013
* New: Code resistors with 6 colors [PRO]
* New: Color code inductor [PRO]
* New: Sum of capacitors [PRO]
* New: Length in meters, feet and yards
* New: Added button “Reset Application” in the Settings menu
* Fix: Correct rounding horsepowers

 

v2.0.0
05/06/2013
* New: Adding ActionBar to return to the main activity (Android 3.0 or higher)
* New: Possibility to change the language Italian-English-French-Espanol
* New: Check version update
* New: Power factor correction [PRO]
* New: Battery life [PRO]
* New: Ethernet wiring [PRO]
* New: Electrical symbols [PRO]
* New: Calculation of Joule Effect [PRO]
* Fix: Improved alignment layout

 

v1.1.4
28/04/2013
* Fix: Autoscroll on click the Calculate button
* Fix: Layout land with low resolutions
* Fix: Rounding sum of resistances
* New: View changelog for each update
* Fix: Errors on multiple widgets

 

v1.1.3
18/03/2013
* New: Power factor (cos phiRadianti) included in the calculations
* Fix: In “Calculation of resistance” you can use W and A

 

v1.1.2
17/03/2013
* Fix: Fixed layout error

 

v1.1.1
14/03/2013
* Fix: Fixed the boxes multiline with Android 2.2
* Fix: Fixed the text size of the drop-down boxes on large screens
* Fix: Code RETMA did not work properly with the English language
* Fix: The type conductor did not work with the English language

 

v1.1.0
12/03/2013
* New: Retma code
* New: Sum resistors
* New: Resistance to reduce voltage
* New: Resistance for led
* Fix: In “Settings” you disable the checkbox “sections available” if as a unit of measure chosen section AWG
* New: Adds icons to the main menu
* Fix: Now the calculations agree that the load is in W in A
* Fix: Increased limits for power and intensity
* Fix: Correct rounding sections available
* New: In “Calculation of section” and the “voltage drop calculation” you can directly enter the type of conductor

 

v1.0.3
05/03/2013
* New: In the “Calculation of section” value of the voltage drop is already provided by the app (you can change it)

 

v1.0.2
01/03/2013
* New: Added settings menu with choice sections are available and selection conductors
* New: Added widget application
* Fix: Fixed some layout landscape
* New: The application also uses AWG size
* Fix: Fixed term mmq
* Fix: Added notification if the motor is too large to be used in single-phase

 

v1.0.1
25/02/2013
* Fix: Fixed layout for large screens (10 “)
* New: Added conversion table AWG / mmq
* Fix: Permissions decimal numbers in the fields of voltage and power
* Fix: Display of decimal results in lower power to 50W

 

v1.0.0
22/02/2013
* Release application